How to change the wiper blades?

Checking the Wiper Blades

Checking the Wiper Blades

Run the tip of your fingers over the edge of the blade to check for roughness.

Replacing the Front Wiper Blades

Make sure your vehicle is off before beginning this procedure.

Note: Do not manually move the wiper arms to service position, doing so may damage the wiper motor. To place the wiper arms in a service position, switch your vehicle on in accessory mode, switch on the wipers and switch your vehicle off when the wipers are at their highest position.

Front Wiper Blades

  1. Lift the wiper arm and then press the wiper blade locking button.
    Note: Do not hold the wiper blade to lift the wiper arm.
  2. Remove the wiper blade.
    Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached.
  3. To install, reverse the removal procedure.
    Note: Make sure that the wiper blade locks into place.

Replacing the Rear Wiper Blades

Changing the Wiper Blades

  1. Lift the wiper arm.
    Note: Do not hold the wiper blade to lift the wiper arm.
  2. Remove the wiper blade.
    Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached.
  3. To install, reverse the removal procedure.
    Note: Make sure that the wiper blade locks into place.

For more information, please refer to your vehicle owner's manual.